Still thinking about opening the window of your negotiation?
The stamp on the white, lucid or opaque sticker is the solution. The adhesive stamp is very resistant if it fits all surface areas of the best quality.
The vetrofanie may be tagliated quadrati, retangolari, rotunda or secondo the form fornita dal cliente.
Per le vetrine è mto richiesta la vetrofania adesiva da interno. La stampa de la votrofania si aplicanto 'into de la vetrina ed è visibile dall'esterno. E' semper intagliata
Tonda, oval or second to the shape of the logo, appears white on the inside and stamped on the outside. To make it if you use transparent PVC adhesive.
Cambi spesso la vetrina del tuo negozio?
The Easydot sticker is easy and easy to apply, with a sticker that is riposizionable and particularly indicated by color to be applied occasionally.
Easydot sticker is available white or transparent, if applied, if it is applied, if it is applied to new, if it is repeated, if used for the new station... If you like Attacca e Stacca.
Stampa adesivi per vetrine
The adhesive stamp on the transparent film has a digital effect, also with Latex technology.
Adhesive in brightly colored PVC and long lasting on the inside.
The minimum size is 5 x 5 cm and the maximum width of the wheel is 158 cm. Spessore 100 micron.
The inviato file all the stamp must be in pdf or jpg format in scale 1:1, resolution minimum 100 dpi, metodo CMYK.
The transparent PVC adhesive attaches to its surface in glass, steel, aluminum, plexiglass, plastic, lacquered wood, cardboard and cardboard. Do not attack gray wood, matured and ABS.
You can personalize the transparent sticker with the right tag, using the border of the graphics secondly with the following trace.
To maintain the durability of the transparent stickers and preserve the graffiti if you can opt for clear or opaque lamination,
Please note that you can highlight the color if you can show the white stamp all over the sticker or only the part with the graphics.
Application of the stickers on vetri
The application of the stickers is simple and fast following this technique:
1. cover the card on the retro stickers
2. Spray the water on the surface of the glass and on the surface with the adhesive glue
3. position the sticker on the glass, adjust the misure
4. When using the spatula, if the spatula is placed in the center or on the other side of the bottom, it should be cured so that the water is avoided to form the aria bowl.
All of these stickers may be applied in any case, without the use of water, but they are necessary for hope and maintenance.